It’s taken weeks to get all the pieces of the puzzle put together but the job got underway this week. It’s been dusty and dirty so far but glimpses of potential are starting to appear. Before the potential is realized there’s a little bit of history to deal with.
This picture shows many aspects of the history of the home. The left side of the picture shows the original structure. It’s a log structure built of native timber. The way it’s built is called timber frame construction. Large beams are used to make the shell of the building then studs are added between the beams and walls are built in the interior. Tooling marks are visible on the beams and there are wood pins where the mortise and tenon are connected. The studs have been made at a sawmill as they are smooth and flat. An angle brace in the corner is a common feature of this type of construction. Ceiling joist sit on top of the beam and are logs with the bottom cut flat to provide a surface for the lath and plaster. Tops of the joist are still rounded and many of them still have bark attached. This room is an add on to the original structure. Notice the rafters are wood logs. On the right side of the picture the original wood shingles are visible as well as evidence of a fire at some time in the past.
The electric box had a light fixture attached. It’s interesting to note that there are 7 or 8 wires coming out of the box and the wires are from three different eras of manufacture. I suspect if the attic of the original home was inspected we’d find evidence of even older electric wires. When dealing with finished surfaces it’s difficult to get wires into the nooks and crannies where they’re needed. Now that the structure is open we’ll be installing new wiring that should service the home for it’s next century of life.
What’s next for this house with history? Are there 100 year old newspapers stuffed in the walls somewhere? I’ll let you know.